Aramid Staple Fiber is made from aramid continuous filament yarns, which are washed, crimped, treated with a finishing agent, and cut to the specified length. Staple fibers are widely used in high-end yarn, blended yarn, needle-spun felt and non-woven industry to improve the performance of protective apparel and technical products.

Identification:

Appearance	Yellow, Black
Linear Density (Dtex)	0.9-4.0
Fiber Length (mm)	38, 51, 60, 76, 100
Crimp Percentage (ea/inch)	6, 7

Product Features:

• Outstanding strength-to-weight ratio

• High tenacity and high modulus

• High cut resistance

• Low flammability

• Electrically non-conductive

• Excellent thermal stability

• Long, well-defined lifetime

Specifications and Technical Data:

Product Code	DPF	Length	Crimp Percentage	Finish	Moisture Regain	Color
Product Code	Denier/Dtex	mm	Ea/inch	%	%
ASF213	1.5/1.67	38.0	7	0.35	7.0	Yellow
ASF215	1.5/1.67	51.0	7	0.35	7.0	Yellow
ASF217	1.5/1.67	76.0	7	0.35	7.0	Yellow
ASF223	2.3/2.50	38.0	6	0.35	7.0	Yellow
ASF225	2.3/2.50	51.0	6	0.35	7.0	Yellow
ASF227	2.3/2.50	76.0	6	0.35	7.0	Yellow
ASFB213	1.5/1.67	38.0	7	0.35	7.0	Black
ASFB215	1.5/1.67	51.0	7	0.35	7.0	Black

Application:

Aramid staple fibers are typically used in textile applications including protective blankets, gloves, and apparel to protect against cutting, heat, flames and sparks. In addition, it is also used to produce blended yarn, spun felt and other non-woven applications.

Storage:

The aramid products should be kept in its original packaging in a dry, clean, and cold location. Best condition is at temperature from 15 to 35°C and Humidity between 35 to 65% to ensure safety，quality and performance.

FAQ

Q: Is your staple fiber para-aramid or meta-aramid?

A: It is para-aramid, stronger than meta-aramid.

Q: Can I get some samples?

A: Yes, you can. Normally, we use FEDEX to deliver the samples.

Q: May I customize the length and dtex?

A: Yes, you can. We will produce based on your requirements.